Practical Components
dummy components, tools and kits
OMNI Practice and Training Kits
PC Boards and Kits
- PC009-40 Aegis Traceability & Control Validation Kit
- Kit Identifier (component part/kit numbers)
- AIM Print Test Board and Kit
- Pb-Free HASL PCB Finish
- Custom PC Practice Boards and Kits
- CircuitCAM Software—Aegis
- Single Pack Hand Solder Kits
- PC000 Zero-Ohm SMD Resistor PCB/ Kit
- PC003 Solder Practice PCB/Kit
- PC005 BGA Variable Pitch and Array PCB/Kit
- PC007 MLF® Test PCB/Kit
- PC008 Solder Practice PCB/Kit
- PC009 Mixed Technology PCB/Kit
- PC011 BGA Fine Pitch PCB/Kit
- SMTA Saber Evaluation PCB/Kit
- PC012 BGA Global Daisy-Chain Test Kit
- PC013 Though-Hole Solder Training Kit
- PC014 IPC 9850 Attribute Defect Rate Kit
- PC015 Rework Kits
- PC016 IPC Compliant Hand Soldering Kit
- PC020 Practical SMT Kit
- PCB 049- Indium MT/PTH Mixed Technology Board and Kit
- PC200 PoP 14mm Board & Kit—Amkor
- PC200 PoP 12mm Board & Kit—Amkor
- SIR Test board and Kit
- WTK-1 Terminal and Wire Kit
- PC031 Lead-Free Process Capability Validation Kit—Cookson
- Flip Chip Test Die Kits—FlipChip Int'l
- µBGAPC Boards and Kits—Tessera
- Omni Training Kits
- Laser Cut Metal Mask Stencils
Nearly all package types are now available in lead-free formulations and dummy packages are available as small as 0402 metric.FREE CATALOG
See our illustrated design guide/catalog for an extensive list of dummy components, SMD production tools and equipment, PCB practice kits and other products designed to save you money and improve your process.
Omni Practice Kits are listed below.
Through-Hole Training Kit
Order Number:TK-1M
- *Terminal components do not fit in TB-3M board. You need to use the terminal holder.
- TB3 board is now available with solder mask and silk screen component identification
| Kit Contents TK-1M | |
|---|---|
| Quantity | Description |
| 15 | Turret Terminals* |
| 15 | Bifurcated Terminals* |
| 15 | Hook Terminals* |
| 15 | Pierced Terminals* |
| 15 | Cup Terminals* |
| 15' | 22 Gauge Wire |
| 15' | 26 Gauge Wire |
| 10 | TO5 Transistors |
| 10 | Spacers for TO5 |
| 4 | TO18 Transistors |
| 4 | Spacers for TO18 |
| 20 | 1/4 Watt Resistors |
| 12 | 1/2 Watt Resistors |
| 10 | Diodes |
| 20 | Capacitors (CKO) |
| 4 | Capacitors (Axial) |
| 6 | DIPs 14/16 Pin |
| 4 | Flat Packs 14 Pin |
| 2 | TB-3M Printed Wiring Board |
Through-Hole Recertification Kit
Order Number: TK-1R
For verification of soldering operator's skills for though-hole board technology. This kit provides sufficient components for students to assemble and solder final workmanship samples for evaluation.
TB3 board is now available with solder mask and silk screen component identification.
| Kit Contents TK-1R | |
|---|---|
| Quantity | Description |
| 1 | TB-3M Through-Hole PWBs |
| 3 | TO5 Transistors |
| 3 | TS5/18 TO5 and TO18 Transistor Spacers |
| 7 | RCO7 1/4 Watt Resistors |
| 2 | CKO5 Capacitors |
| 2 | IC6 16 Lead DIPs |
| 1 | FP14 14 Lead Flat Packs |
Standard Pitch Training Kit
Order Number: TK-2
| Kit Contents TK-2 | |
|---|---|
| Quantity | Description |
| 4 | SOIC - Small Outline IC 16 pin (300 mils wide) |
| 5 | PLCC - Plastic Leaded Chip Carrier 20 Pin |
| 2 | PLCC - Plastic Leaded Chip Carrier 44 Pin |
| 10 | SOIC - Small Outline IC 16 pin (150 mils wide) |
| 5 | LCC - Leadless Ceramic Chip Carrier |
| 14 | Small Outline Transistor SOT89 |
| 8 | Chip Resistor 1206 |
| 8 | MELF - Metal Electrode Face Device SOD80 |
| 16 | Tantalum Capacitor “C” Case (6032) |
| 4 | Flat Pack 14 Pin |
| 1 | TB4 Printed Wiring Board |
Fine Pitch Training Kit
Order Number: TK-2FP
This kit contains all the material listed for the TK-2 Training Kit plus what is shown below.
| Kit Contents TK-2FP | |
|---|---|
| Quantity | Description |
| 4 | QFP - Quad Flat Packs 44 Pins( 0.030" Pitch) |
| 2 | QFP - Quad Flat Packs 100 Pins (0.025" Pitch) |
| 1 | TB4 - TB4FP PWB (Replaces TB4 PWB) |
